Description
ABS
ABS filament is a material with low cost and good mechanical properties; ABS plastic has good toughness and impact resistance, which can print strong and durable parts;
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ABS |
| Density(g/cm3) | 1.04 |
| Heat Distortion Temp(℃,0.45MPa) | 78 |
| Melt Flow Index(g/10min) | 12(220℃/10kg） |
| Tensile Strength(MPa) | 43 |
| Elongation at Break(%) | 22 |
| Flexural Strength(MPa) | 66 |
| Flexural Modulus(MPa) | 1177 |
| IZOD Impact Strength(kJ/㎡) | 29 |
| Durability | 8/10 |
| Printability | 8/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 230 – 270℃ Recommended temperature：240℃ |
| Bed temperature(℃) | 95 – 110°C |
| Fan Speed | 0% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | High temperature tape, PVP solid glue |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | √ |
| Soft | —— |
| Composite | —— |
| UV Resistant | —— |
| Water Resistant | —— |
| Dissolvable | —— |
| Heat Resistant | √ |
| Chemically Resistant | —— |
| Fatigue Resistant | —— |
| Need drying | —— |
| Heated Bed Required | √ |
| Print recommend | Print in an enclosed space, minimize the overhang angle structure in the model |
