Flashforge Finder – Single Extruder 3D Printer
In stock (can be backordered)
In stock (can be backordered)
FlashForge Finder 3D Printer Bullet Points.
- Fully assembled. No setup.
- Intelligent assisted leveling system. More precise and easier calibration.
- 3.5-inch touchscreen panel. Just four taps to start printing.
- Filament-run-out detection. Always successful output.
- WiFi Connection. Wirelessly control your printer.
- Built-in 4G memory storage. Less printing interruption.
- Slide build plate. Easier 3D prints removal.
- Sleek and contained design. No heated plate. Safer to use.
- Noise level as low as 50dB. Quiet to use.
FINDER 3D PRINTER
Easiest to use. Safe. Affordable.
Getting started in 3D printing with Finder is much easier and more affordable than ever. It is capable of printing right out of the box with few tweaks. All the heated elements are protected from touch, and the printing material is non-toxic PLA. Finder is the perfect starter 3D printer for families, schools as well as novice users.
The next generation of ease to use. An experience unlike any other.
Finder is the easiest-to-use 3D printer so far. It is fully assembled. And now with its assisted leveling system, you just need to do very few tweaks before starting prints. Featured with a 3.5-inch touchscreen panel, filament-run-out detection, USB stick and 2nd Generation Wi-Fi connection and more, Finder delivers you an top-notch user experience that any other 3D printers can not.
Safe to use. Quiet to use.
Finder has a very clean design with cables concealed from sight within the plastic alloy frame. All the heated components are kept away from touch. Single non-toxic PLA filament option keeps your creations simple and fun. And the noise level is as low as 50 dB, or even less. All of these make it the kind of printer great around kids of all age or home 3D printing users alike.
Intelligent assisted leveling system.
More precise and easier calibration.
Finder features an intuitive calibration detection system to assist leveling. You are directed to tighten or loosen leveling screws until a beeper barely sounds, then it detects the distance between nozzle and build plate to verify whether your leveling is at the right position. Once the first location is leveled, you’re directed to next two screw locations accordingly with same operation. In this whole process, you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise than before.
Operation is easy.
Just like your smart phone.
Finder sports a 3.5-inch HD IPS touchscreen right at the top of the printer with big, easy to understand controls. Only 4 taps to start your print, no need to hook it up to your computer! See previews of model files and you know that is what you want to print. Real-time view printing status and you know when it will be finished. Built-in multiple languages compatibility including English, German, French, Dutch, Polski, Korean and Japanese is added to its ease of use.
2nd Generation Wireless connection. More stable.
Finder features the 2nd generation Wi-Fi connection with more stable wireless file transmission. And now you can send 3D files from your computer to Finder 4GB memory with your own Wi-Fi network under AP or STA modes. USB stick is another stable way to transfer files. No USB cable, no interruption even when your computer runs into standby.
Excellent and innovative filament management.
The filament management on the Finder is rather impressive. The cartridge housing for 1.75mm Flashforge PLA filament is able to detect when the filament is running out and alerts you to load new filament instead of getting stuck with extruding nothing. Finder can be used with third-party filament if you turn off this function in the settings.
Slide-in build plate. Easier 3D prints removal.
Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily. At same time, it can minimize damages or offsets to the build plate.
|PRINTING||MECHANICAL & DIMENSIONS||SOFTWARE & ELECTRICAL|
FFF (Fused Filament Fabrication)Build Volume
140 L X 140 W X 140 H mm
5.5 X 5.5 X 5.5 inLayer Resolution
0.0039~0.019 inPositioning Precision
XY: 11 microns [0.0004 in]
Z: 2.5 microns [0.0001 in]Filament Diameter
1.75 mm [0.069 in]Nozzle Diameter
0.4 mm [0.015 in]
|Frame & Body
Plastic AlloyExtruder Quantity
420 x 420 x 420 mm
[16.5 x 16.5 x 16.5 in]Shipping Dimension
500 x 500 x 500 mm
[19.7 x 19.7 x 19.7 in]Product Weight
|Software & Firmware
STL, OBJOperating Systems
Windows 7/ 8 / Vista
Mac OS XConnectivity
Wi-Fi, USB Cable, USB Stick, Language Support
English / ChineseAC Input
115-230 V, 50-60 Hz, 150 W
WHAT’S IN THE BOX?
|600g PLA Filament x1, Print Tape x 1|
|SD Card x1, Power Cable x1, USB Cable x1,|